Work Experience
Associate Engineer II - Power System Planning & Studies, Electrical Consultants Inc., Virginia, USA.
Duration: Dec. 2024 - Present
Projects Working:
1. AC & DC Short Circuit study:
230 kV Beehive Substation connecting BESS in Arizona, USA.
Calisto BESS (SMA 3950-UP-US) in Texas, USA.
Siemens 3000 MW, ±525 kV VSC-HVDC project from Wyoming to Utah station, USA.
2. Harmonic study:
345 kV Monte Cristo substation connecting BESS in Texas, USA.
3. Development of a 36 MVAR capacitor bank-controller model in PSCAD for the Milagro substation connecting Solar and
BESS in New Mexico, USA.
4. Temporary Overvoltage (TOV) study:
525 kV Easley Substation connecting Solar & BESS in California, USA.
345 kV Lumina-II substation connecting BESS in Texas, USA.
345 kV Quantum I & II Substation connecting Solar & BESS in Texas, USA.
5. Switching & Lightning Overvoltage study:
345 kV Sierra Substation connecting Solar system in Nevada and California, USA.
500 kV Hashknife substation connecting Solar & BESS in Arizona, USA.
115 kV Canisteo Substation connecting wind farms in New York, USA.
138 kV Bobcat Bluff substation connecting BESS & wind farms in Texas, USA.
345 kV Lake Trout Substation connecting solar system in Indiana, USA.
6. Transient Recovery Voltage (TRV) study:
69 kV Great Bend Solar Substation connected to Granny Run Substation in Ohio, USA.
7. Cable Transient Overvoltage study (TOV, Switching & Faults studies):
138 kV Underground cable connected between Longhorn Crypto Capital 5 (LCC5) & Long Draw II substations in Texas, USA.
69 kV Underground cable connected between LCC5 & Henshaw/Hoops Substations in Arizona, USA.
Lead Engineer - HVDC System Design & Studies, GE Renewable Energy, Dresden, Germany.
Duration: Aug. 2023 - Sep. 2024 (1 Year 2 Months)
Projects Involved:
Eastern Green Link-1 (EGL1): 2-GW ±525 kV Point-to-Point Bipole VSC-HVDC Project in Scotland to England:
Design of Sequencing Strategy (start-up & shutdown sequences for various operating configurations & transition between different configurations) for this scheme.
Expert - Power System Planning & Studies, Siemens Energy, Erlangen, Germany.
Duration: Sep. 2022 - Jul. 2023 (11 Months)
Projects Involved:
East Anglia 3: Feasibility study of 1.4 GW Monopole VSC-HVDC Project (Offshore-Onshore):
Modeling & tuning of offshore wind farms & VSC-HVDC systems.
Verification of grid forming converters capability based on GB Grid code GC-137 by performing AC Voltage, phase angle and frequency dynamics, AC network faults & islanding studies.
Harmonic Impedance study of electrolyzer converter:
Positive & negative sequence harmonic impedance of PEM electrolyzer converter are measured for the frequency ranges from 50 Hz to 2500 Hz considering different operating scenarios.
Dynamic performance study of 1000 MW, 500 kV HVDC Bipole LCC Project in Inga-Kolwezi LCC-HVDC link, Congo:
Modeling & parametrizing bipolar LCC-HVDC link for both Siemens & ABB controls.
Verification of the load flow & dynamic performance of LCC-HVDC link.
Tools: PSCAD/EMTDC, MATLAB/Simulink, DIgSILENT PowerFactory.
Principal Engineer - Power System Planning & Studies, KNR Engineers & Consultants (JEF Group Company), Chennai, India.
Duration: Jan. 2022 - Aug. 2022 (8 Months)
Projects Involved:
Performed Insulation coordination studies for 132 kV, 230 kV and 400 kV GIS & AIS substations & transmission lines.
Performed Transformer energization, capacitor banks, line/cable switching studies.
Grid study: Load flow, dynamic, short circuit, transient, harmonic & relay coordination studies for HV/MV/LV grids with renewables interconnection.
Tools: PSCAD/EMTDC, MATLAB/Simulink, EMTP-RV.
Senior Researcher - Power Systems, Faculty of Electrical Engineering & Computing, University of Zagreb, Croatia.
Duration: Aug. 2021 - Dec. 2021 (5 Months)
Projects Worked:
Electric vehicle transportation for truck delivery in Zagreb city - GDi.
Research work on Microgrid Controls: Centralized, decentralized, communication based, model predictive & adaptive droop control techniques.
Tools: MATLAB/Simulink, Python.
Senior Research Specialist - Power Systems, Rensselaer Polytechnic Institute, Troy, New York, United States of America.
Duration: Jan. 2020 - Dec. 2020 (1 Year)
Projects Worked:
Active Methods of Estimating Grid Resistance & Reactance – EPRI.
Asynchronous Re-closing Impact Study in New York Distribution Systems – NYSERDA.
Negative Sequence Voltage Protection Scheme for Ground Fault Over-voltage – NYSERDA.
Tools: MATLAB/Simulink, Opal-RT hardware-in-loop simulation, PSCAD/EMTDC.
PhD Researcher - Power Systems, National Institute of Technology Karnataka, India.
Duration: July 2014 – August 2019 (5 Years 2 Months)
Major Tasks of PhD Project:
Design, modeling, & control of VSC-based HVDC grids interconnecting offshore wind farms (PMSG based wind turbine models).
Steady state, dynamic performance, short circuit, transient behavioral simulations & harmonic studies of VSC-HVDC grid connected offshore wind farms.
Development of a protection scheme for DC line faults in VSC-HVDC grids.
Simulation studies on protection of AC grids/transmission lines with the impact of VSC-HVDC links.
Teaching Assistant - Major Course:
Computer Aided Protection of Power Systems
Tools: PSCAD/EMTDC, MATLAB/Simulink, RET-615 and REF-615 relays.
Assistant Professor - Electrical Engineering, Christian College of Engineering and Technology, Dindigul, India.
Duration: June 2012 – May 2014 (2 Years)
Major Courses:
Electric Circuit Theory
Electromagnetic Theory
Flexible AC Transmission Systems (FACTS)
High Voltage Direct Current (HVDC) Transmission
Tools: MATLAB/Simulink.